cryogenic icp pressure sensor, 100 psi, 50 mv/psi, 7/16-20 unf - 2a mtg thd, for k-type seal mounting

ICP® Pressure Sensor

Model 102M80A

Add to Quote
  • CE
  • IP

Cryogenic ICP pressure sensor, 100 psi, 50 mV/psi, 7/16-20 UNF - 2A mtg thd, for K-type seal mounting

  • Measurement Range: 100 psi (689.5 kPa)
  • Sensitivity: (±15%)50 mV/psi (7.25 mV/kPa)
  • Resonant Frequency: >=250 kHz (>=250 kHz)
  • Electrical Connector: 10-32 Coaxial Jack
  • Weight: 0.9 oz (25 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[4] Due to high sensitivity, the static pressure should be applied and removed very slowly. Rate should prevent more than 10 Volt change in output until Output Bias Voltage returns to normal (approximately 15 times discharge time constant).
[5] -5V output may be limited by the output bias.
[6] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Measurement Range (for ±5V output) 100 psi 689.5 kPa [5]
Useful Overrange (for ± 10V output) 200 psi 1379 kPa [3]
Sensitivity (±15 %) 50 mV/psi 7.25 mV/kPa
Maximum Pressure (Total) 7.5 kpsi 51711 kPa [4]
Maximum Pressure (step) 1000 psi 6900 kPa
Resolution 2 mpsi 0.014 kPa [2]
Resonant Frequency ≥250 kHz ≥250 kHz
Rise Time (Reflected) ≤2.0 µ sec ≤2.0 µ sec
Non-Linearity ≤1.0 % FS ≤1.0 % FS [1]
Environmental
Acceleration Sensitivity ≤0.002 psi/g ≤0.0014 kPa/(m/s²)
Temperature Range (Operating) -320 to 212 °F -196 to 100 °C
Temperature Coefficient of Sensitivity ≤0.06 %/°F ≤0.108 %/°C
Maximum Flash Temperature 3000 °F 1648.89 °C
Maximum Vibration 2000 g pk 19613 m/s² pk
Maximum Shock 20000 g pk 196133 m/s² pk
Electrical
Discharge Time Constant (at room temp) ≥1.0 sec ≥1.0 sec
Excitation Voltage 15 to 30 VDC 15 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance 100 Ohm 100 Ohm
Output Bias Voltage 3 to 8 VDC 3 to 8 VDC
Physical
Housing Material 304L/316L Stainless Steel 304L/316L Stainless Steel
Thread Adaptor Material Vascomax C-300 Vascomax C-300
Diaphragm 316L Stainless Steel 316L Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.9 oz 25 gm

* All specifications are at room temperature unless otherwise specified.