Electronic Vibration Switches

Advanced technology for instantaneous protection

Electronic vibration switches are used to protect rotating machinery against failure due to excessive vibration. They consist of a precision accelerometer, circuit board, and one or more electromechanical or solid-state relays for alarm and shutdown protection when machine vibration levels become too high. PCB®’s electronic vibration switches combine smart ICP® sensor technology with time-tested switch designs to offer options suited for the toughest industrial challenges.


Mechanical vs. electronic switches

For critical machinery, electronic vibration switches have several advantages over mechanical units. Electronic switches use a built-in precision accelerometer to monitor vibration levels, rather than a spring-latch mechanism. They have no moving parts, are typically more reliable, and have a much higher degree of accuracy. Mechanical vibration switches are, by default, latching, meaning once they trip they stay tripped until reset by someone. Electronic switches can operate this way as well, but can also be set to non-latching. This means that after a relay is tripped, it will automatically reset itself when the vibration level drops below the alarm level.


Programmable set points

Electronic vibration switches from PCB offer the option of adjustable set points via our programmable ICP® accelerometers. These smart switches provide the user the ability to set a specific numerical value (in velocity) for the vibration threshold with programming software, putting an end to the era of unreliable set points.

 

Optional time delays

An additional convenience of PCB’s electronic vibration switches is the option of startup and alarm delays. A startup delay allows for an amount of time where the vibration level is ignored until the machine achieves steady state operation. With an alarm delay, vibration must exceed the threshold for a specified delay time period in order for the switch to trip. This can be used to avoid false trips, or a shut-down for random transient events, such as bumping into a machine.

 

Industrial-minded design

Our line of reliable, programmable electronic vibration switches includes a product for every industrial need, including:


  • Options of two set points with individual alert and alarm relays
  • 4-20 mA output signal for vibration monitoring
  • Explosion-proof models available

Choose PCB for your preventative maintenance needs

To discuss specific applications, please contact us at 1-800-828-8840 or request a quote.

Compare selected models ()
[ clear compare ]
Mouse Over Image for Product Description.
Model Number

Model:685B0001A10

  • Measurement Range: 0 to 1.5 in/sec pk
  • Measurement Range: 0 to 38.1 mm/s pk
  • Cable Input: Dual Cord Grips
  • Cable Input: Dual Cord Grips
  • Relay: (Alert)10 A, 245 VAC/30 VDC, Form C
  • Relay: (Alert)10 A, 245 VAC/30 VDC, Form C
  • Power Required: 85-245 VAC 50/60 Hz
  • Power Required: 85-245 VAC 50/60 Hz
  • Electrical Connector: Screw Terminals
  • Electrical Connector: Screw Terminals
$825.00 USD
(Pricing valid in US only)
Add to Cart

Add this product to my product comparison

Model Number
$910.00 USD
(Pricing valid in US only)
Add to Cart

Add this product to my product comparison

Model Number

Model:685B0001A13

  • Measurement Range: 0 to 1.5 in/sec pk
  • Measurement Range: 0 to 38.1 mm/s pk
  • Cable Input: Single 1/2 in. NPT Conduit Hub
  • Cable Input: Single 1/2 in. NPT Conduit Hub
  • Relay: (Alert)10 A, 245 VAC/30 VDC, Form C
  • Relay: (Alert)10 A, 245 VAC/30 VDC, Form C
  • Power Required: 85-245 VAC 50/60 Hz
  • Power Required: 85-245 VAC 50/60 Hz
  • Electrical Connector: Screw Terminals
  • Electrical Connector: Screw Terminals
$910.00 USD
(Pricing valid in US only)
DatasheetAdd to Cart

Add this product to my product comparison

Model Number

Model:685B0001C14

  • Measurement Range: 0 to 1.5 in/sec pk
  • Measurement Range: 0 to 38.1 mm/s pk
  • Cable Input: Dual 1/2 in. NPT Conduit Hubs
  • Cable Input: Dual 1/2 in. NPT Conduit Hubs
  • Relay: (Alert)10A/245 VAC or 5A/30 VDC
  • Relay: (Alert)10A/245 VAC or 5A/30 VDC
  • Power Required: 85-245 VAC 50/60 Hz
  • Power Required: 85-245 VAC 50/60 Hz
  • Electrical Connector: Screw Terminals
  • Electrical Connector: Screw Terminals
$1090.00 USD
(Pricing valid in US only)
Add to Cart

Add this product to my product comparison

Model Number
$1030.00 USD
(Pricing valid in US only)
Add to Cart

Add this product to my product comparison

Model Number

Model:685B1001A30

  • Measurement Range: 0 to 1.5 in/sec pk
  • Measurement Range: 0 to 38.1 mm/s pk
  • Cable Input: Dual Cord Grips
  • Cable Input: Dual Cord Grips
  • Relay: (Alert)10 A, 245 VAC/30 VDC, Form C
  • Relay: (Alert)10 A, 245 VAC/30 VDC, Form C
  • Power Required: 85-245 VAC 50/60 Hz
  • Power Required: 85-245 VAC 50/60 Hz
  • Electrical Connector: Screw Terminals
  • Electrical Connector: Screw Terminals
$945.00 USD
(Pricing valid in US only)
Add to Cart

Add this product to my product comparison