Log In

Log In

Need an Account? Start Here

 

Model: 039301-01103

Add to Cart for Quote

PCB L&T Rotary Torque Angle Transducer, w/Auto-ID, 10,000 Nm (7376 lbf-ft), 1 1/2-inch Square Drive, 10-pin PT Receptacle

  • Measurement Range: 7376 lbf-ft (10 kNm)
  • Sensitivity: 2.0 mV/V (2.0 mV/V)
  • Non-Linearity: <=0.25 % FS
  • Maximum Speed: 750 RPM

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (Full Scale Capacity)7376 lbf-ft10 kNm 
Sensitivity (output at rated capacity)2.0 mV/V2.0 mV/V[1] 
Non-Linearity≤0.25 % FS≤0.25 % FS[2] 
Hysteresis≤0.25 % FS≤0.25 % FS[2] 
Non-Repeatability≤0.05 % FS≤0.05 % FS[2] 
Interchangeabilty≤0.30 % FS≤0.30 % FS[2][3] 
Environmental
Overload Limit8851 lbf-ft12 kNm 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)+70 to +150 °F+21 to +66 °C 
Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0018 %Reading/°C[4] 
Temperature Effect on Zero Balance (Maximum)±0.002 %FS/°F±0.0018 %FS/°C[4] 
Electrical
Bridge Resistance350 Ohm350 Ohm 
Excitation Voltage10 VDC10 VDC[5] 
Insulation Resistance≥5 GOhm≥5 GOhm 
Zero Balance≤2 % FS≤2 % FS[2] 
Counts Per Revolution2880 2880 [6] 
Resolution w/ Quadrature1/8 °1/8 °[6] 
Output VoltageHigh 5V to Low 0.5V High 5V to Low 0.5V [6] 
Power Required (maximum)5 VDC @ 120mA5 VDC @ 120mA[6] 
Magnetic Encoder (Poles)720 720 [6] 
Magnetic Encoder (Ouput)See Note See Note [7][6] 
Shunt Calibration≤0.25 % FS≤0.25 % FS[2][8] 
Auto IDTTL ProprietaryTTL Proprietary 
Physical
Size - Shaft Length5.50 in139.7 mm[9] 
Size - Housing Length2.63 in66.8 mm[9] 
Size - Housing Height4.88 in123.9 mm[9] 
Weight7.5 lb3402 gm 
Mounting1.50 inch Sq Drive38.1 mm Sq Drive[10] 
Sensing ElementStrain GageStrain Gage 
Housing MaterialAluminumAluminum 
Shaft MaterialSteelSteel 
Electrical ConnectorPT02H-12-10PPT02H-12-10P 
Maximum Speed750 RPM750 RPM 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Matched to ±0.25% F.S.
[2] FS - Full Scale.
[3] Matched for mV/V and shunt calibration.
[4] Over compensated temperature range.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] Magnetic Encoder Specifications.
[7] A-B Track 90° Phase Difference, Flat Over Operating Speed
[8] Matched with 43.575 kOhm Precision Resistor.
[9] See Outline Drawing LT36492 for Complete Dimensions
[10] Per ANSI B107.4 Specifications
[11] See PCB Declaration of Conformance PS119 for details.
Accessories:
Optional
080920-01000(1)
080962-01000MODEL 962 DATA RECORDER(1)
097000-34445INTERCONNECT CABLE(1)
4242R-000630MATING CONNECTOR PT06A-12-10S(SR)(1)
Supplied
7122R-04352APRECISION CAL RESISTOR 43.575 kOhm(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads