Log In

Log In

Need an Account? Start Here

 

Model: 039230-50002

Add to Cart for Quote

PCB L&T Rotary Torque Angle Transducer, w/Auto-ID, 32 ozf-in (0.23 Nm), 1/4-inch Hex Drive, 10-pin PT Receptacle

  • Measurement Range: 32 ozf-in (0.23 Nm)
  • Sensitivity: 1.1 mV/V (1.1 mV/V)
  • Non-Linearity: <=0.25 % FS
  • Maximum Speed: 5000 RPM

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (Full Scale Capacity)32 ozf-in0.23 Nm 
Sensitivity (output at rated capacity)1.1 mV/V1.1 mV/V 
Non-Linearity≤0.25 % FS≤0.25 % FS[1] 
Hysteresis≤0.25 % FS≤0.25 % FS[1] 
Non-Repeatability≤0.05 % FS≤0.05 % FS[1] 
Interchangeabilty≤0.30 % FS≤0.30 % FS[1][2] 
Environmental
Overload Limit96 ozf-in0.68 Nm 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)+70 to +150 °F+21 to +66 °C 
Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0018 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.002 %FS/°F±0.0018 %FS/°C[3] 
Electrical
Bridge Resistance350 Ohm350 Ohm 
Excitation Voltage10 VDC10 VDC[4] 
Insulation Resistance≥5 GOhm≥5 GOhm 
Zero Balance≤2 % FS≤2 % FS[1] 
Counts Per Revolution1440 1440 [5] 
Resolution w/ Quadrature1/4 °1/4 °[5] 
Output VoltageHigh 5V to Low 0.5V High 5V to Low 0.5V [5] 
Power Required (maximum)5 VDC @ 120mA5 VDC @ 120mA[5] 
Magnetic Encoder (Poles)360 360 [5] 
Magnetic Encoder (Ouput)See Note See Note [6][5] 
Shunt Calibration≤0.25 % FS≤0.25 % FS[1][7] 
Auto IDTTL ProprietaryTTL Proprietary 
Physical
Size - Shaft Length4.25 in108.0 mm[8] 
Size - Housing Length2.30 in58.4 mm[8] 
Size - Housing Height2.00 in50.8 mm 
Weight.75 lb340 gm 
Mounting1/4 inch Hex Drive6.35 mm Hex Drive[9] 
Sensing ElementStrain GageStrain Gage 
Housing MaterialAluminumAluminum 
Shaft MaterialSteelSteel 
Electrical ConnectorPT02H-12-10PPT02H-12-10P 
Maximum Speed5000 RPM5000 RPM 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] FS - Full Scale.
[2] Matched for mV/V and shunt calibration.
[3] Over compensated temperature range.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[5] Magnetic Encoder Specifications.
[6] A-B Track 90° Phase Difference, Flat Over Operating Speed
[7] Matched with 87.150 kOhm Precision Resistor.
[8] See Outline Drawing 45188 for Complete Dimensions
[9] Per ANSI B107.4 Specifications
[10] See PCB Declaration of Conformance PS119 for details.
Accessories:
Optional
080920-01000(1)
080962-01000MODEL 962 DATA RECORDER(1)
097000-34445INTERCONNECT CABLE(1)
4242R-000630MATING CONNECTOR PT06A-12-10S(SR)(1)
Supplied
7122R-04352APRECISION CAL RESISTOR 43.575 kOhm(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads