Log In

Log In

Need an Account? Start Here


Model: 039225-50101

Add to Cart for Quote

PCB L&T Rotary Torque Angle Transducer, w/Auto-ID, 100 lbf-in (11.3 Nm), 1/4-inch Square Drive, 10-pin PT Receptacle

  • Measurement Range: 100 lbf-in (11.3 Nm)
  • Sensitivity: 2.0 mV/V (2.0 mV/V)
  • Non-Linearity: <=0.25 % FS
  • Maximum Speed: 5000 RPM

Add this product to my product comparison
Compare selected models ()

Measurement Range (Full Scale Capacity)100 lbf-in11.3 Nm 
Sensitivity (output at rated capacity)2.0 mV/V2.0 mV/V[1] 
Non-Linearity≤0.25 % FS≤0.25 % FS[2] 
Hysteresis≤0.25 % FS≤0.25 % FS[2] 
Non-Repeatability≤0.05 % FS≤0.05 % FS[2] 
Interchangeabilty≤0.30 % FS≤0.30 % FS[2][3] 
Overload Limit150 lbf-in16.9 Nm 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)+70 to +150 °F+21 to +66 °C 
Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0018 %Reading/°C[4] 
Temperature Effect on Zero Balance (Maximum)±0.002 %FS/°F±0.0018 %FS/°C[4] 
Bridge Resistance350 Ohm350 Ohm 
Excitation Voltage10 VDC10 VDC[5] 
Insulation Resistance≥5 GOhm≥5 GOhm 
Zero Balance≤2 % FS≤2 % FS[2] 
Counts Per Revolution1440 1440 [6] 
Resolution w/ Quadrature1/4 °1/4 °[6] 
Output VoltageHigh 5V to Low 0.5V High 5V to Low 0.5V [6] 
Power Required (maximum)5 VDC @ 120mA5 VDC @ 120mA[6] 
Magnetic Encoder (Poles)360 360 [6] 
Magnetic Encoder (Ouput)See Note See Note [7][6] 
Shunt Calibration≤0.25 % FS≤0.25 % FS[2][8] 
Auto IDTTL ProprietaryTTL Proprietary 
Size - Shaft Length3.23 in82.0 mm[9] 
Size - Housing Length2.30 in58.4 mm[9] 
Size - Housing Height2.00 in50.8 mm[9] 
Weight.75 lb340 gm 
Mounting1/4 inch Sq Drive6.35 mm Sq Drive[10] 
Sensing ElementStrain GageStrain Gage 
Housing MaterialAluminumAluminum 
Shaft MaterialSteelSteel 
Electrical ConnectorPT02H-12-10PPT02H-12-10P 
Maximum Speed5000 RPM5000 RPM 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Matched to ±0.25% F.S.
[2] FS - Full Scale.
[3] Matched for mV/V and shunt calibration.
[4] Over compensated temperature range.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] Magnetic Encoder Specifications.
[7] A-B Track 90° Phase Difference, Flat Over Operating Speed
[8] Matched with 43.575 kOhm Precision Resistor.
[9] See Outline Drawing 45187 for Complete Dimensions
[10] Per ANSI B107.4 Specifications
[11] See PCB Declaration of Conformance PS119 for details.
080962-01000MODEL 962 DATA RECORDER(1)
4242R-000630MATING CONNECTOR PT06A-12-10S(SR)(1)
7122R-04352APRECISION CAL RESISTOR 43.575 kOhm(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads