Log In

Log In

Need an Account? Start Here


Model: 027137-07022

Add to Cart for Quote

PCB L&T Hand Torque Angle Wrench, w/Angle Encoder & Auto-ID, 200 in-lb (22.7 Nm), 12-inch Handle, 3/8-inch Square Drive, 10-pin PT Receptacle

  • Measurement Range: 200 in-lb (22.7 Nm)
  • Sensitivity: (output at rated capacity) 2 mV/V

Add this product to my product comparison
Compare selected models ()

Measurement Range (Full Scale Capacity)200 in-lb22.7 Nm 
Sensitivity (output at rated capacity ) (output at rated capacity)2 mV/V2 mV/V[1] 
Non-Linearity≤0.25 % FS≤0.25 % FS[2] 
Hysteresis≤0.25 % FS≤0.25 % FS[2] 
Interchangeabilty≤0.30 % FS≤0.30 % FS[4] 
Overload Capacity150 % F.S. 150 % F.S.  
Drive Size3/8 inch Square3/8 inch Square[3] 
Quadrature Output2950 Counts/Re√ 2950 Counts/Re√ [1] 
Quadrature Output Voltage0 to 5V 0 to 5V  
Angle Resolution0.125 degrees 0.125 degrees  
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)+70 to +150 °F+21 to +66 °C 
Temperature Effect on Output (Maximum)±0.01 %RO/°F±0.018 %RO/°C 
Temperature Effect on Zero Balance (Maximum)±0.01 %FS/°F±0.018 %FS/°C 
Bridge Resistance350 Ohm350 Ohm 
Excitation Voltage (Recommended)10 VDC or VAC rms10 VDC or VAC rms 
Zero Balance≤2 % FS≤2 % FS 
Shunt Calibration2 mV/V2 mV/V[5] 
Angle Power+5 VDC +5 VDC  
Output Polaritycw+cw+ 
Size - Length12.00 in305 mm[3] 
Weight12.8 oz363 gm 
Mating ConnectorPT06A-12-10SPT06A-12-10S 
Color CodeYellowYellow 
Socket Retaining TypeBall/SpringBall/Spring 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Nominal.
[2] FS - Full Scale.
[3] See Drawing 49867 for Complete Dimensions
[4] Matched for mV/V and shunt calibration.
[5] 2 mV/V with 43.575 kOhm precision resistor.
[6] See PCB Declaration of Conformance PS117 for details.
080962-01000MODEL 962 DATA RECORDER(1)
4242R-000630MATING CONNECTOR PT06A-12-10S(SR)(1)
7122R-04352APRECISION CAL RESISTOR 43.575 kOhm(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads