Log In

Log In

Need an Account? Start Here

 

Model: 3713B1110G



Triaxial MEMS DC accelerometer, 200 mV/g, +/- 10 g, +6 to 30 VDC excitation

No longer in production,current model is 3713F1110G

  • Sensitivity: (±5%) 200 mV/g (20.4 mV/(m/s²))
  • Measurement Range: ±10 g pk (±98.1 m/s² pk)
  • Electrical Connector: 9-Pin
  • Weight: 0.6 oz (17.3 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±5 %)200 mV/g20.4 mV/(m/s²)[3] 
Measurement Range±10 g pk±98.1 m/s² pk 
Frequency Range (±5 %)0 to 1000 Hz0 to 1000 Hz 
Frequency Range (±10 %)0 to 1500 Hz0 to 1500 Hz 
Resonant Frequency≥2 kHz≥2 kHz 
Phase Response (100 Hz)<10 °<10 ° 
Non-Linearity≤1 %≤1 %[1] 
Broadband Resolution (0.5 to 100 Hz)1.2 mg rms0.012 m/s² rms[2] 
Transverse Sensitivity≤3 %≤3 % 
Environmental
Overload Limit (Shock)±3000 g pk±29420 m/s² pk 
Temperature Range (Operating)-65 to +250 °F-54.0 to +121 °C 
Temperature Range (Storage)-65 to +250 °F-54.0 to +121 °C 
Temperature Coefficient of Sensitivity±3 %±3 %[5] 
Zero g Offset Temperature Coefficient±2 % FSO±2 % FSO[4][5] 
Base Strain Sensitivity0.0001 g/µε0.001 (m/s²)/µε[2] 
Magnetic Sensitivity10.5 µg/gauss1.03 (m/s²)/Tesla[2] 
Electrical
Excitation Voltage6 to 30 VDC6 to 30 VDC 
Current Consumption≤6 mA≤6 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Offset Voltage±40 mVDC±40 mVDC[6] 
Spectral Noise (1 to 100 Hz)107.9 µg/√Hz1058 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Physical
Housing MaterialTitaniumTitanium 
SealingHermeticHermetic 
Size - Length0.8 in20.3 mm 
Size - Width0.8 in20.3 mm 
Size - Height0.8 in20.3 mm 
Weight0.6 oz17.3 gm 
Electrical Connector9-Pin9-Pin 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Measured at 100 Hz, 1 grms.
[4] FSO = Full Scale Output over the Measurement Range (4VDC).
[5] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[6] Offset tolerance is based on 10 ft of 037 test cable.
[7] See PCB Declaration of Conformance PS027 for details.
Accessories:
Supplied
080A12Adhesive Mounting Base(1)
081B05Mounting Stud (10-32 to 10-32)(1)
ACS-85T(1)
M081B05Mounting Stud 10-32 to M6 X 0.75(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads