Log In

Log In

Need an Account? Start Here

 

Model: M260A03

Add to Cart for Quote

Triax ICP® force sensor, 10k lb (Fz), 4000 lb (Fx,y), 0.25 mV/lb (z), 1.25 mV/lb (x, y)

  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Electrical Connector: 4-Pin

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±20 %) (z axis)0.25 mV/lb0.06 mV/N[3][4] 
Sensitivity (±20 %) (x or y axis)1.25 mV/lb0.28 mV/N[3][4] 
Measurement Range (z axis)10000 lb44.48 kN 
Measurement Range (x or y axis)4000 lb17.79 kN 
Maximum Force (z axis)11000 lb48.93 kN 
Maximum Force (x or y axis)4400 lb19.57 kN 
Maximum Moment (z axis)240 ft-lb325.4 Nm 
Maximum Moment (x or y axis)325 ft-lb440.7 Nm 
Broadband Resolution (z axis)0.05 lb-rms0.222 N-rms[2] 
Broadband Resolution (x or y axis)0.01 lb-rms0.04 N-rms[2] 
Upper Frequency Limit39000 Hz39000 Hz 
Low Frequency Response (-5 %) (z-axis)0.01 Hz0.01 Hz 
Low Frequency Response (-5 %) (x or y axis)0.001 Hz0.001 Hz 
Non-Linearity≤1 % FS≤1 % FS[1] 
Cross Talk (between x and y axis)±3 %±3 % 
Cross Talk (between (x or y axis) and z axis)±5 %±5 % 
Environmental
Temperature Range-65 to +250 °F-54 to +121 °C 
Electrical
Full Scale Output (Z Direction)±2.5 VDC±2.5 VDC 
Full Scale Output (X and Y Direction)±5 VDC±5 VDC 
Discharge Time Constant (z axis)≥50 sec≥50 sec 
Discharge Time Constant (x or y axis)≥500 sec≥500 sec 
Excitation Voltage (all channels)20 to 30 VDC20 to 30 VDC 
Constant Current Excitation (all channels)2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Spectral Noise (1 Hz) (X & Y)0.003 lb/√Hz0.0134 N/√Hz 
Spectral Noise (10 Hz) (X & Y)0.001 lb/√Hz0.00445 N/√Hz 
Spectral Noise (100 Hz) (X & Y)0.0004 lb/√Hz0.00178 N/√Hz 
Spectral Noise (1000 Hz) (X & Y)0.0001 lb/√Hz0.000445 N/√Hz 
Spectral Noise (1 Hz) (Z)0.02 lb/√Hz0.089 N/√Hz 
Spectral Noise (10 Hz) (Z)0.005 lb/√Hz0.0222 N/√Hz 
Spectral Noise (100 Hz) (Z)0.002 lb/√Hz0.0089 N/√Hz 
Spectral Noise (1000 Hz) (Z)0.0005 lb/√Hz0.00222 N/√Hz 
Output PolarityPositivePositive 
Physical
Preload40000 lb178 kN[5] 
Stiffness (z axis)38.8 lb/µin6.8 kN/µm[2] 
Stiffness (x or y axis)11.4 lb/µin2.0 kN/µm[2] 
Size - Height0.790 in20.07 mm 
Size - Length2.25 in57.1 mm 
Size - Width2.25 in57.1 mm 
Size - Bolt Diameter1 in25 mm 
Size - ID1.023 in25.98 mm 
Size - Sensing Surface1.800 in45.72 mm 
Weight9.56 oz271 gm 
Housing MaterialStainless SteelStainless Steel 
SealingHermeticHermetic 
Electrical Connector4-Pin4-Pin 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Sensitivites are for listed preload. Sensitivites may vary ±5% depending on preload used.
[4] Sensitivities are dependent upon supplied bolt.
[5] Preload should be at least 10 times the X and Y operating range used.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
081A71Mounting Stud(1)
082B06Anti-Friction Washer(1)
083A11Pilot Bushing(1)
Optional Versions:
(M) Metric Mount
Accessories:
    M081A71Mounting Stud(1)
(W) Water Resistant Cable
 ENGLISHSI
    Electrical Connection PositionSide
Product Documents
Additional Downloads