ICP® quartz force ring, 20k lb comp., 0.25 mV/lb
- Measurement Range: 20000 lb (88.96 kN)
- Sensitivity: (±15%) 0.25 mV/lb (56.2 mV/kN)
- Low Frequency Response: (-5%) 0.0003 Hz
- Upper Frequency Limit: 60000 Hz
- Temperature Range: -65 to +250 °F (-54 to +121 °C)
Add this product to my product comparison
Compare selected models ()
| English: | SI: | |
---|
Performance |
Sensitivity (±15 %) | 0.25 mV/lb | 56.2 mV/kN |   |
Measurement Range (Compression) | 20000 lb | 88.96 kN |   |
Maximum Static Force (Compression) | 25000 lb | 111.2 kN |   |
Broadband Resolution (1 to 10000 Hz) | 0.4 lb-rms | 1.78 N-rms | [1]  |
Low Frequency Response (-5 %) | 0.0003 Hz | 0.0003 Hz | [3]  |
Upper Frequency Limit | 60000 Hz | 60000 Hz | [4]  |
Non-Linearity | ≤1 % FS | ≤1 % FS | [2]  |
Environmental |
Temperature Range | -65 to +250 °F | -54 to +121 °C |   |
Temperature Coefficient of Sensitivity | ≤0.11 %/°F | ≤0.198 %/°C |   |
Electrical |
Discharge Time Constant (at room temp) | ≥2000 sec | ≥2000 sec |   |
Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC |   |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA |   |
Output Impedance | ≤100 Ohm | ≤100 Ohm |   |
Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC |   |
Output Polarity (Compression) | Positive | Positive |   |
Physical |
Preload | 4000 lb | 17.793 kN |   |
Stiffness | 23 lb/µin | 4 kN/µm | [1]  |
Size - Diameter | 1.10 in | 27.9 mm |   |
Size - Height | 0.430 in | 10.9 mm |   |
Size - Bolt Diameter | .5 in | 12 mm |   |
Size - ID (Hole Diameter) | 0.520 in | 13.2 mm |   |
Size - OD (Sensor) | 1.10 in | 27.9 mm |   |
Size - Sensing Surface | 0.888 in | 22.6 mm |   |
Weight | 1.3 oz | 38 gm |   |
Housing Material | Stainless Steel | Stainless Steel |   |
Sealing | Hermetic | Hermetic |   |
Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack |   |
Electrical Connection Position | Side | Side |   |
All specifications are at room temperature unless otherwise specified.