Log In

Log In

Need an Account? Start Here


Model: 054220-01224

Add to Cart for Quote

PCB L&T Fastener Force Washer, Metric, M20, 220 kN (44.5 klbf), 5-ft Integral Cable w/pigtails

  • Measurement Range: 49458 lb (220 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: 1.62 in (41.1 mm)
  • Size - Height: 0.595 in (15.1 mm)

Add this product to my product comparison
Compare selected models ()

Measurement Range (Full Scale Capacity)49458 lb220 kN[2] 
Sensitivity (output at rated capacity)1.50 mV/V1.50 mV/V[1][2] 
Non-Linearity±5 % FS±5 % FS[1] 
Hysteresis±5 % FS±5 % FS[1] 
Non-Repeatability±2 % FS±2 % FS[1] 
Resonant Frequency10 kHz10 kHz 
Overload Limit74187 lb330 kN 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)N/A N/A  
Temperature Effect on Output (Maximum)±0.02 %Reading/°F±0.036 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.02 %FS/°F±0.036 %FS/°C[1] 
Bridge Resistance350 Ohm350 Ohm[2] 
Excitation Voltage (Recommended)10 VDC10 VDC[4] 
Output Polarity (Compression)PositivePositive 
Size - Height0.595 in15.1 mm 
Size - Diameter1.62 in41.1 mm 
Fastener Size0.787 in20 mm 
Through Hole Diameter0.794 in20.16 mm 
Sensing ElementStrain GageStrain Gage 
Electrical Connectorpigtail endspigtail ends 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] FS - Full Scale.
[2] Nominal.
[3] Over compensated operating temperature range.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads