Log In

Log In

Need an Account? Start Here


Model: 054216-01144

Add to Cart for Quote

PCB L&T Fastener Force Washer, Metric, M16, 140 kN (31.4 klbf), 5-ft Integral Cable w/pigtails

  • Measurement Range: 31473 lb (140 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: 1.348 in (34.2 mm)
  • Size - Height: 0.525 in (13.3 mm)

Add this product to my product comparison
Compare selected models ()

Measurement Range (Full Scale Capacity)31473 lb140 kN[1] 
Sensitivity (output at rated capacity)1.50 mV/V1.50 mV/V[1][2] 
Non-Linearity±5 % FS±5 % FS[2] 
Hysteresis±5 % FS±5 % FS[2] 
Non-Repeatability±2 % FS±2 % FS[2] 
Resonant Frequency10 kHz10 kHz 
Overload Limit47210 lb210 kN 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)N/A N/A  
Temperature Effect on Output (Maximum)±0.02 %Reading/°F±0.036 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.02 %FS/°F±0.036 %FS/°C[2] 
Bridge Resistance350 Ohm350 Ohm[1] 
Excitation Voltage (Recommended)10 VDC10 VDC[4] 
Output Polarity (Compression)PositivePositive 
Size - Height0.525 in13.3 mm 
Size - Diameter1.348 in34.2 mm 
Fastener Size0.630 in16 mm 
Through Hole Diameter0.636 in16.16 mm 
Sensing ElementStrain GageStrain Gage 
Electrical Connectorpigtail endspigtail ends 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads