Log In

Log In

Need an Account? Start Here


Model: 054210-01543

Add to Cart for Quote

PCB L&T Fastener Force Washer, Metric, M10, 54 kN (12.1 klbf), 5-ft Integral Cable w/pigtails

  • Measurement Range: 12139.68 lb (54 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: 0.943 in (23.952 mm)
  • Size - Height: 0.420 in (10.668 mm)

Add this product to my product comparison
Compare selected models ()

Measurement Range (Full Scale Capacity)12139.68 lb54 kN[2] 
Sensitivity (output at rated capacity)1.50 mV/V1.50 mV/V[1][2] 
Non-Linearity±5 % FS±5 % FS[1] 
Hysteresis±5 % FS±5 % FS[1] 
Non-Repeatability±2 % FS±2 % FS[1] 
Resonant Frequency10 kHz10 kHz 
Overload Limit18210 lb81 kN 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)N/A N/A  
Temperature Effect on Output (Maximum)±0.02 %Reading/°F±0.036 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.02 %FS/°F±0.036 %FS/°C[1] 
Bridge Resistance350 Ohm350 Ohm[2] 
Excitation Voltage (Recommended)10 VDC10 VDC[4] 
Output Polarity (Compression)PositivePositive 
Size - Height0.420 in10.668 mm 
Size - Diameter0.943 in23.952 mm 
Fastener Size0.394 in10 mm 
Through Hole Diameter0.40 in10.16 mm 
Sensing ElementStrain GageStrain Gage 
Electrical Connectorpigtail endspigtail ends 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] FS - Full Scale.
[2] Nominal.
[3] Over compensated operating temperature range.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads