| Series 3741 High Sensitivity DC Response Accelerometers |
| For track performance analysis; legislative & safety testing; vehicle handling assessment; ride quality; NVH; crash sleds; suspension, shock absorber and damper studies; and road load data acquisition applications. |
 |
| • |
Full scale ranges from + 2 to 200 g; high sensitivities |
| • |
Frequency response down to 0 Hz |
| • |
Triaxial version available
(Model 3713) |
| • |
Excellent thermal stability |
| • |
Reliable, repeatable performance |
| • |
Competitively priced and available for immediate delivery |
|
Click here to view our brochure |
|
| Torkdisc® In-line Rotary Torque Sensor System |
| For automotive powertrain & chassis dynamometer testing; gas & diesel engine dynamometer testing; transfer cases & differentials; torque studies on pumps; gearbox efficiency testing; fans & electric motors; or where axial space is at a premium. |
 |
| • |
Noise immune, zero maintenance torque measurements |
| • |
Field proven telemetry system digitized signals, alleviates noise & data corruption |
| • |
High torsional stiffness; compact and low weight |
| • |
Low sensitivity to extraneous loads and moments |
| • |
Capacities from 1,000 to 225,000 in-lb (113 to 25.4k N-m) full-scale and maximum speeds to 15,000 RPM |
| • |
No bearing or slip rings to maintain |
|
Click here to view our spec sheet |
|
| Acoustic Sensors |
| For acoustic holography; noise source identification; sound quality; legislative certification testing; quality control; ride quality; squeak & rattle evaluation; system & component performance; vehicle & powertrain NVH applications. |
 |
| • |
Complete line of pre-polarized, externally polarized (200 V) ICP® microphones |
| • |
Type 1 condenser and cost-effective TEDS compatible array microphones |
| • |
Linear measurements to 192 dB; frequencies to 20k Hz |
| • |
Full complement of low-noise, ICP® and high temperature preamplifiers and accessories |
| • |
Low-profile surface microphones |
| • |
Sizes from 1/8” to 1” diameter; many models available for immediate delivery |
|
Click here to view our brochure |
|
| Series 261A Three-component Triaxial Force Sensors |
For measuring dynamic forces between engine, chassis, and body with specific interfaces to shocks, struts & mounts for noise path analysis, ride & handling, NVH, and road load data applications; monitoring biomechanical feedback response without preload in crash applications; monitoring forces in component & system performance testing; and durability applications. |
 |
| • |
Provide simultaneous force measurements along x,y and z-axes |
| • |
Preloaded between two plates with
a four-screw mounting pattern, to allow easy installation |
| • |
Available in a variety of sizes; single axis models also available |
| • |
Full-scale ranges from 500 to
4,000 lb (2.2 to 18 kN) in X- and
Y-directions, 1,000 to 10k lb
(4.5 to 45 kN) in the Z-direction |
|
Click here to view our spec sheet |
|
| Series 356 Triaxial ICP® Accelerometers |
For NVH; road load data acquisition; transmission & powertrain durability testing; vehicle, component & system durability testing; accelerated, multi-axis, & environmental 4-poster vehicle testing; and component & system performance testing. |
 |
| • |
Robust, hermetically sealed, for consistent performance in harsh environments |
| • |
High temperature models to +163 ºC |
| • |
High frequency response to 10k Hz |
| • |
Measure in three orthogonal directions |
| • |
Lightweight titanium construction, smallest unit weighs just 1 gram |
| • |
Shear mode sensing geometry, with single-point hookup for cable or connector |
|
Click here to view our spec sheet |
|
| Air Bag Acoustic Sensor |
High Intensity Acoustic Microphone For measuring automotive airbag deployment noise and total impulse of airbag noise; filtered output tailored to the human ear |
 |
| • |
Measurement ranges to 189 dB (57.2 kPa) |
| • |
Sensitivities 79.8 mV/kPa
(550 mV/psi) |
| • |
Temperature ranges of -100 to +250 ºF
(-73 to +121 ºC) |
| • |
Frequency response 0.05 Hz to
20 kHz |
| • |
96 dB Resolution (1.4 Pa) |
|
Click here to view our spec sheet |
|
| Series 111A General Purpose Pressure Sensors |
For dynamic measurements of compression, pulsation, cavitation, pneumatic, hydraulic, fluid, and other dynamic pressures often encountered in automotive components such as brakes, pumps, struts, manifolds and HVAC systems. |
 |
| • |
Dynamic ranges to 20k psi
(138 MPa) |
| • |
Resonant frequencies to 400k Hz |
| • |
Temperature ranges to
+ 400 °F (+240 °C) |
| • |
Sensitivities to 100 mV/psi
(14.5 mV/kPa) |
| • |
Stock models and alternate mounting options |
| • |
Solid-state construction, hermetically-sealed housings, and laser-welded flush diaphragms |
| • |
Provide undistorted high frequency response and durability, even in adverse environmental conditions. |
|
Click here to view our spec sheet |
